
Description
Cavitation Vacuum
Ultrasonic
beauty machine
S-011
INTRODUCE
Ultrasound cavitacion easy to produce a liquid implosion effect, Namely, wave expansion and compression form a large number of micro-gap in the liquid, which is full of gas and steam, the strong sound waves have positive effects on the liquid molecules at compression cycle, while it has vacuum effect at expansion cycle. There is cohesion among liquid and biological tissues, molecular bonding is Weak in low density fat cells, and the low vacuum caused by strong sound waves can generate Organize gaps, in physics known as the "molecular motion, makes a high energy level, which finally led to break of fat cells. The machine applies the cavitation theory, uses the 40kHz~1MHz ultrasound to make intense vibration,which causes a inner explosion in the fat tissues· thus get rid of lipocyte. It can effectively break down stubborn and deep fat, decreaselipocyte quantity and its size. The diathermal and vacuum suction can promote lipocyte andtissues liquid flow, which help drainage of faty acid, waste and toxin through lymph system. Thevacuum function will promote liquid flow of f lipocyte and fat tissues, then speed up excretion oftoxins and waste, achieve effect of fat elimination, slimming, skin tightening and enhancingmuscle flexibility.
Note
1.People who has fever, infectious diseases, acute diseases.
2.People with heart disease or configured cardiac pacemaker.
3.Patients with severe high blood pressure, tumor disease, asthma, deep vein thrombosis,varix, thyroid ,cancer, falling sickness.
4.people with hemorrhagic disease, trauma, vascular rupture, skin inflammation, skin disease.
5.Pregnant women
6.Do not use at the abdomen during menstrual period
7.Medical Plastic parts, or parts with metal inside
8.People with an abnormal immune system
Forbidden group
1.There should be enough gel when using M50, M80, 4X fat explosion head
2.The ultrasound head should not stay out of work for too long time while outputting energy. Click “pause” to stop working to avoid damage.
3. M50, M80 ultrasound heads should not stay still at one part for too long time, and do not use It on bones.
4.Please step on service brake then there will be sound wave exist when using M80 ultrasoundhead.
5.M80 ultrasound head can not be used on the back, avoid on the bones, and daily care shouldbe within 30 minutes every time.
6.Fasten the bonding tie first before using 4X fixed ultrasound head, then operate it on theFatty part, avoid bones. When finished, take the work head out first and place it well, andthen unfasten the bonding tie.
7.Extract oil or massage oil should be applied when using the vacuum and strong sound waveHead to avoid skin wound. Do not use jelly lotion to avoid jam.
8.The vacuum intensity should be adjusted according to endurance of client, from weakGradually to strong. Please operate it on thick muscle or fatty part, do not use on thin,Accidented or much hair parts.
9. As skin and health status are varied from one to another, there may occur red mark orMeasles after operation. It is normal phenomenon, which will fade away later.
10. If there are effective products supported, the effect will be better.
11. Clean the filter bottle after use. Clean method: Put some paper at the bottom of the filterBottle, use your finger to upgrade the piston, make the oil leak out.
Vacuum & ultrasound head
Vacuum & ultrasound head Uses vacuum and 1MHz ultrasound, the perfect combination to deep dissolve fat, break fat, de-toxin, tighten and shaping, do massage in different depth on the fatty parts. It can break upthe Subcutaneous fat, decrease cellulite accumulation, smooth lymph and discharges the fattyacid and toxin that is decomposed through lymph system. Has immediate effect in bodyshaping.
1. Applies extract oil on skin, the amount should be according to move flexibility of the vacuum& ultrasound head.
2.Select vacuum& ultrasound work mode, regulate vacuum suction and outputintensity, setting working time.(20 min every parts)..
3.The beautician hold the work head move slowly on skin, the movement should be hangtogether, and evenly, the vacuum suction should be regulated according to clients endurance.Move in beeline direction repeatedly to do fat dissolving treatment, to exclude toxin, to move
4X ultrasound board
The energy produced by 1 million times per second ultrasonic vibration, will be absorbed bySubcut0aneous tissue and converted into heat, which can accelerate liquid flow and to breakup large molecules, effectively decompose fat, decrease cellulite. For fat accumulated parts
(such as: the abdomen, buttocks, thighs).
1. Choose the appropriate bonding tie according to the parts need cared. Applies gel evenly onthe ultrasound board, and put it inside the binding ties.. You can put it horizontally or vertically.
2.Select work mode, the setting work mode are all pulse wave output, regulate outputintensity(0.5w/cm2~5.0cm2
3.Click start ,the machine start working.
4.The machine will suspended automatically if the setting time is over. Beautician takes theUltrasound board out first, and then open the binding ties.
5.Clean the leftovers with hot towel, use warm towel to clean the ultrasound head.
M50 ultrasound head
Use 0.8MHz strong ultrasound, can penetrate deep skin, to dissolve subcutaneous fat. Onemillion times per second high-speed vibration make the cells molecular to attrite intenselyinside, thus decrease fat, decompose lipocyte size, aim at cellulite and honey combinflammation. To improve skin status, tighten flab muscle, increase skin elasticity. Thermaleffect can accelerate cells metabolism, promote blood circulation and lymph flow. Against theshallow fat, less fat parts.
1 Applied enough gel on skin need treated.
2 Select work mode P1~P10 regulate output intensity(0.5w/cm2~5.0w/cm2),settingwork time(15 min every part).
3 Click” start”, machine begin working. Beautician hold the ultrasound head to move slowly onskin, in circle or beeline repeatly, do not stay unmoved.
4 The machine will pause automatically if the setting time is over.
5 Clean the leftovers with hot towel, use warm towel to clean the ultrasound head.The daily treatment should be within 60 min
M80 ultrasound head
The machine applies the cavitation theory, uses the40kHz~1MHz ultrasound to make intense vibration, which causes a inner explosion in the fat
tissues thus get rid of lipocyte. It can effectively break down stubborn and deep fat, decreaselipocyte quantity and its size. The diathermal and vacuum suction can promote lipocyte andtissues liquid flow, which help drainage of faty acid, waste and toxin through lymph system. The
vacuum function will promote liquid flow of f lipocyte and fat tissues, then speed up excretion oftoxins and waste, achieve effect of fat elimination, slimming, skin tightening and enhancingmuscle flexibility.
1. Applied gel on fleshy parts(eg.abdomen,hip,thigh) The amount depends on movingFlexibility of the ultrasound head.
2.Set work time(10 min every part),regulate output intensity 5w/cm2~25w/cm2 .
3.Click “start”, put the service brake under your feet, step on to start working, move away for pause.
4. Beautician hold the ultrasound head to move slowly on skin, in circle or beeline repeatly, theother hand push the fat towards the ultrasound head.
5.Do not use on back, aviod using on bones.
6.Do not use on uterus part when women do abdomen care. Abdomen treatment duringMenstruate should be avoided.
* Enough gel are needed, you may feel painful if mediumis not enough.
* The total treatment time for daily care should be within 30 min.
7.The machine will pause automatically if the setting time is over.
8.Clean the leftovers with hot towel, use warm towel to clean the ultrasound head.
specification
|
Input voltage |
AC110V/220V 50-60Hz |
|
Power consumption |
<500w |
|
Screen |
10-inch wide color touch screen |
|
Cooling device output temperature |
-13 °C - +45°C |
|
Cooling device output pressure |
0-100KPa |
|
Default time |
0-120min |
|
Fuse size |
F2AL250V |
|
Ambient temperature |
5°C-+40°C |
|
Relative humidity |
≤80% |
|
Atmospheric pressure |
80KPa-106KPa
|
